Abstract: A method and apparatus for transmitting uplink control information (UCI) for Long Term Evolution-Advanced (LTE-A) using carrier aggregation is disclosed. Methods for UCI transmission in the uplink control channel, uplink shared channel or uplink data channel are disclosed. The methods include transmitting channel quality indicators (CQI), precoding matrix indicators (PMI), rank indicators (RI), hybrid automatic repeat request (HARQ) acknowledgement/non-acknowledgement (ACK/NACK), channel status reports (CQI/PMI/RI), source routing (SR) and sounding reference signals (SRS). In addition, methods for providing flexible configuration in signaling UCI, efficient resource utilization, and support for high volume UCI overhead in LTE-A are disclosed.

Abstract: In NR, a slot structure of a UE may be dynamic due the number of symbols of PDCCH and whether the slot has UL data, among other considerations. Additionally, to support multi-TRP/multi-panel/multi-BWP operation, a UE may be configured with multiple TRSs, and when a UE needs to receive multiple TRSs in the same slot, efficient signaling of the TRSs is important because of the high overhead involved. During a transmission, a UE may need to do beam switching when there is a beam failure, but existing systems do not have mechanisms for the UE to synchronize time and frequency with a new beam. Further, when a UE switches to a new beam, the effect on scheduled TRS transmission for old beams is unclear. Fine frequency and time tracking may also be required during an initial access procedure. Existing NR systems do not address how a UE may perform time and frequency tracking during an initial access procedure. Additionally, URLLC data may need to be transmitted to a UE immediately in an NR system.

Abstract: Non-Orthogonal Multiple Access (NOMA) transmissions are described herein in which sequence collision is mitigated or eliminated by exploiting the randomness nature of user specific reference bits and data bits. Further, methods, systems, and devices that use NOMA for small data transmissions are disclosed.

Abstract: A wireless device, such as user equipment (UE) or other apparatus, like may use a transparent mode operation in which the device is not aware of the operation mode of abase station, such as a gNB or other transmission and receive point (TRP), via the use of configurations for Frame Based Equipment (FBE) and Load Based Equipment (LBE) operating modes. A base station may initiate a Channel Occupancy Time (COT) that is an FBE COT or an LBE COT, in which the wireless device follows FBE or LBE procedures accordingly. A variety of criteria may be applied in determining whether to use FBE or LBE procedures, and to switch between them. A network may use indicate the intention to switch operation mode and may do so via implicit or explicit indications. Similarly, a wireless device may autonomously switch operation mode, and may indicate the selected mode to the network.

Abstract: Measurement modeling and filtering may include configurable cell quality derivation method is used for multi-beam based NR networks; a common measurement model that considers different characteristics of the two measurement signals, NR synchronization signal and additional reference signal; and a multi-level measurement filtering approach that handles different mobility scenarios in an NR network. Measurement configuration and procedures may include a measurement gap design during which UE may use to perform measurements for beam sweeping based NR networks; a group of triggering events that may be used to trigger UE mobility management in an NR network; a content format that may be used for the transmission of UE measurement report; a measurement object design (the object on which a UE may perform the measurements) to reduce UE measurement overhead and cost; and a downlink measurement based inter-cell handover procedure that may be used in an NR network.

Abstract: Methods, systems, and devices may enable UE power savings in multi-beam connectivity using multi-TRPs or multi-UE panels. Methods, systems, and devices may enable PDCCH skipping in the active duration of the UE by skipping PDCCH monitoring associated with groups of CORESETs.

Abstract: Logical Channel Prioritization (LCP) may be enhanced by accounting for Quality of Service (QoS) attributes of single hop and multi-hop paths. QoS attributes may be communicated as a QoS budget comprising a number of attributes, or as a single composite QoS “resistance” factor that quantifies the compounded impact of number of hops, latency, load conditions, and the like. The QoS budget or resistance may dynamically adjusted, and may be used by LCP to provide differentiated uplink resource allocation to data of the bearer or logical channel subject to different transmission paths between the transmitter and the receiver, for example. QoS budget and resistance information may be used to, e.g., enhance Buffer Status Report (BSR) and Scheduling Request (SR) operations.

Abstract: Disclosed herein are methods and apparatus for HARQ feedback in NR Uu groupcast or broadcast, including methods for assigning and releasing the groupcast RNTI for Uu groupcast or broadcast, methods for enabling and disabling the HARQ feedback for Uu groupcast or broadcast, and methods for HARQ feedback and corresponding resource allocation for Uu groupcast or broadcast, including ACK-NACK based Uu groupcast HARQ feedback, NACK only based Uu groupcast HARQ feedback, and Enhanced ACK-NACK based Uu groupcast HARQ feedback. Also disclosed herein are methods for collision handling between HARQ feedback for Uu broadcast/groupcast and other transmissions.

Abstract: The present application at least describes a frame structure in new radio. The frame structure includes a self-contained transmission time interval. The transmission time interval includes a control information region including plural beams. The interval also includes a downlink transmission channel region including plural beams. The frame structure is configured for downlink control information to be swept through the time interval. The frame structure is also configured for an uplink or downlink grant resource subsequently to be swept through the time interval. The present application is also directed to a method for configuring user equipment.

Abstract: An electronic device including a transceiver to communicate with a network; and circuitry. The circuitry is configured to perform beam failure detection on a monitored cell; detect a beam failure on the monitored cell; determine at least one new set of candidate beam reference signals (CB-RSs) from at least one set of CB-RS configured for the device; determine if any CB-RS in the at least one new set of CB-RSs meets a criterion, and in a case that any CB-RS in the at least one new set of CB-RSs meets the criterion: select a beam corresponding to a CB-RS in the new set that meets the criterion as the new beam, and indicate the selected new beam to the network; and in a case that no CB-RS in the new set of CB-RS meets a criterion, indicate to the network that no CB-RS in the new set meets the criterion.

Abstract: A method may perform random access subject to Listen-Before-Talk (LBT) in an NR-U Serving Cell with multiple models. Enhancements may be to the Random Access Preamble Transmission procedure to enable autonomous BWP Switching or sub-band in the event the channel is busy for the active UL BWP.

Abstract: Downlink Control Information (DCI) may be expanded, or enhanced, to allow nodes such as UEs, eNBs, NR-nodes, gNBs, and TRPs in M2M, IoT, WoT networks to coordinate activities on PHY, MAC, and RRC layers. For example, DCI fields may be added or enhanced to include, for example, information regarding time resource allocation, frequency resource allocation, mini-slot allocation, and or Code Block Group (CBG) transmission. Such information, or similar information, may be used in operations such as mini-slot operations, Code Block Group (CBG) transmission, group common Physical Downlink Control Channel (PDCCH), grant-free and grant-less operations, response to Beam Failure Recovery Request (BFRR), UL Transmit (TX) beam change, Quasi-Co-Location (QCL) operations, aperiodic CSI-RS transmission and interference measurement, Band Width Part (BWP) operations, and Multi-Transmission and Reception Point (TRP)/Multi-Panel.

Abstract: Methods, systems, and devices may support BFD with multi-TRP transmission or support BFR with multi-TRP transmission, among other things. For BFD with multi-TRP transmission, there may be the explicit configuration or implicit configuration. With regard to BFR with multi-TRP transmission there may: BFR using contention-free PRACH, BFR using PUCCH, BFR using contention-free 2-step RACH, or BFR using PUSCH.

Abstract: The present application at least describes a method for obtaining channel access in a network. The method includes a step of selecting, via a gNodeB, a spatial filter from a first set of spatial filters to perform listen before talk (LBT). The method includes a step of detecting, via the gNodeB, a channel in an idle state. The method also includes a step of obtaining, a directional channel occupancy time (COT) in the channel in a direction of the selected spatial filter. The method also includes a step of transmitting, to a node, a channel access indicator transmission (CAI-T) on a beam in the cot via a spatial filter of a second set of spatial filters. The method further includes a step of receiving, from the node, a channel access indicator response (CAI-R). The method further includes a step of sensing, via short channel sensing and via the spatial filter or another spatial filter of the second set of spatial filters, the channel is clear.

Abstract: A user equipment (UE) determines sidelink resources for use in vehicle wireless communications. Initial beam establishment uses a Sidelink Synchronization Signal (SLSS), a Sidelink Channel State Information Reference Signal (SL-CSI-RS), or a Sidelink Demodulation Reference Signal (SL-DMRS). Beam refinement may then be conducted either by UEs in communication with each other, or by just one of the UEs. A base station such as a gNB may assign resources for a dedicated sidelink carrier or a shared licensed sidelink carrier, e.g., dynamically, as pre-configured by RRC, or based on activation and deactivation. In such cases, initial beam establishment and refinement may include gNB controlled beam forming at a connectionless stage, gNB controlled beam forming at connection stage with scheduling DCI transmitted to Tx UE only, or gNB controlled beam forming at connection stage with scheduling DCI transmitted to both Tx UE and Rx UE.

Abstract: The present application at least describes a frame structure in new radio. The frame structure includes a self-contained transmission time interval. The transmission time interval includes a control information region including plural beams. The interval also includes a downlink transmission channel region including plural beams. The frame structure is configured for downlink control information to be swept through the time interval. The frame structure is also configured for an uplink or downlink grant resource subsequently to be swept through the time interval. The present application is also directed to a method for configuring user equipment.

Abstract: A method may perform random access subject to Listen-Before-Talk (LBT) in an NR-U Serving Cell with multiple models. Enhancements may be to the Random Access Preamble Transmission procedure to enable autonomous BWP switching or sub-band in the event the channel is busy for the active UL BWP.

Abstract: A first apparatus in a wireless communication system, the first apparatus including circuitry configured to trigger a Random Access Channel (RACH) procedure; select a two-step RACH procedure from among a plurality of RACH procedures as a RACH type to be performed; select a MsgA transmission resource; transmit a MsgA; and monitor for a network response from a second apparatus.

Abstract: Downlink Control Information (DCI) may be expanded, or enhanced, to allow nodes such as UEs, eNBs, NR-nodes, gNBs, and TRPs in M2M, IoT, WoT networks to coordinate activities on PHY, MAC, and RRC layers. For example, DCI fields may be added or enhanced to include, for example, information regarding time resource allocation, frequency resource allocation, mini-slot allocation, and or Code Block Group (CBG) transmission. Such information, or similar information, may be used in operations such as mini-slot operations, Code Block Group (CBG) transmission, group common Physical Downlink Control Channel (PDCCH), grant-free and grant-less operations, response to Beam Failure Recovery Request (BFRR), UL Transmit (TX) beam change, Quasi-Co-Location (QCL) operations, aperiodic CSI-RS transmission and interference measurement, Band Width Part (BWP) operations, and Multi-Transmission and Reception Point (TRP)/Multi-Panel.

Abstract: Embodiments contemplate methods, systems, and apparatuses for interference measurement in a wireless communication network, including wireless communication networks the employ MIMO in uplink and/or downlink communication. Embodiments contemplate identifying one or more interference measurement resource elements that may be received from one or more transmission points. Embodiments also contemplate performing interference measurement estimation based at least in part on the identified one or more interference measurement resource elements. Channel state information (CSI) perhaps in the form of reports may be generated based at least in part on the one or more interference measurement estimation. Embodiments also contemplate that the CSI report may be transmitted to one or more nodes. In some embodiments, the one or more interference measurement resource elements may be received as part of a set of resource elements.